Manufacturer, Exporter, Wholesaler and Supplier of Automation and Instrumentation Products such as Process Conductiviy / TDS Controllers Transmitter and our setup is situated in Pune, Maharashtra, India.
|
Specification |
Range (Selectable) |
Conductivity |
TDS |
Resolution |
20.00μS/cm, |
20.00ppm |
0.01 |
200.0μS/cm, |
200.0ppm |
0.1 |
2000μS/cm, |
2000ppm |
1 |
20.00mS/cm |
20.00ppt |
0.01 |
200.0mS/cm |
200.0ppt |
0.1 |
|
Model - MS 623 - HMD |
|
|
|
Display |
64 x 128 Graphic LCD Display with Back Light |
Accuracy |
Betterthen +/- 1% of F.S |
Temperature range |
0.0 to 200.0°C |
Temperature Resolution |
0.1°C |
Temperature Accuracy |
+/- 0.5°C |
Temperature Compensation |
Automatic |
Temperature Coefficient |
0.1 to 10.0 % |
Normalization Temperature |
25.0°C |
Temperature Sensor I/P |
PT-100 RTD |
Cell Constant, K |
K=0.01, 0.1, 0.5, 1.0, & 10 (User Selectable) |
TDS Factor |
0.40 to 1.00 |
Calibration |
Manual single point calibration |
Calibration Range |
+/- 30% of the Display reading |
Control Relay O/P |
Two 5 Amp. 24V Contacts free Relay |
Control Set point logic |
2 set point with 1 relay, 2 set point with 2 relay, 4 set point with 2 relay |
Current O/P (Optional) |
4-20mA DC fully isolated O/P (For Conductivity OR TDS only) |
Modbus O/P (Optional) |
485 Modbus RTU |
Operating Environment |
0 to 50°C |
Supply |
230VAC, +/- 10V, 50 Hzs |
Instruments Size n& type |
96x96x70mm, Panel Mount Type (Grey High Quality ABS Plastic Housing) |
|
|
*200.0mS Or 200.0ppt Range Work With 10k Cell Constant Only.
MSSet Instrumentation & Controls reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements |
|
|
|